SynthMaker Filament Manual Open SynthMaker (opens in a new tab)

SynthMaker · Filament

A modular synth, one real circuit at a time.

Filament is SynthMaker's modular synth: a case of hardware-style units, each one a real circuit solved as it plays. It grows one unit at a time, and every unit comes with a lesson that patches it into the case.

Built in the open

Filament is being built in the open, one unit at a time, and this page grows with it.

Where it plays today:

  • The whole case: in SynthMaker for Mac, ready to play, with lessons that build its circuit units one by one.
  • Each unit's circuit: on any computer, in your browser. Every built unit has its own page here, and its circuit opens in SynthMaker on the web.
  • The whole case is in the Mac app.
Filament's case, three-quarter view. The case so far: Keys, the VCO, the envelope, the LFO, the noise, the ladder, the VCA and Out, with Tidewell's low-pass gate on a second row under the VCA.
The case so far: Keys, the VCO, the envelope, the LFO, the noise, the ladder, the VCA and Out, with Tidewell's low-pass gate on a second row under the VCA.

Open the circuit. Change it. Make it yours.

The circuit behind a unit is a parts list that SynthMaker solves as it plays. Open it in SynthMaker on the web, and every part is there to change.

  1. The Ladder, by Halden Instruments, in the case.

    1The unit The Ladder, by Halden Instruments, in the case.

  2. The Ladder's circuit open in SynthMaker on the web: its parts list beside its schematic.

    2Its circuit Open it in SynthMaker: the parts list and the schematic, part for part.

  3. 3Change it Change a value or add a part. Double its four capacitors and it sings an octave lower.

  4. A module of your own in SynthMaker's Patch, with the Ladder's circuit and an LFO inside, and its face: Rate and Depth knobs, In and Out jacks.

    4Make it yours Wire it into the Patch, then make it a module of your own, with its own face of knobs and jacks.

Open the Ladder’s circuit in SynthMaker (opens in a new tab)Looking inside is free. Changing it is part of SynthMaker Pro.

Listen

Six circuits, one minute

Six sounds from SynthMaker's circuits (the circuits course and Filament's Ladder), rendered offline at full circuit quality: the Ladder sings, chords pour through its ten transistors, an OTA filter bubbles, a diode filter screams, an OTA bass growls, an acid filter squelches, and the Ladder sings again. The drums are SynthMaker's own. 0:58

The makers

Six makers build Filament's units, each with its own panels, knobs and lettering, the way a real case mixes makers.

Filament's makers are imaginary, except SynthMaker. Every circuit is real.

Unit by unit

The case grows a unit at a time, each with a lesson that patches it in.

  1. KeysSynthMakerLesson 1
  2. LadderHalden InstrumentsLesson 1
  3. OutSynthMakerLesson 1
  4. VCORookery ElectricLesson 2
  5. EnvelopeOndine LabsLesson 3
  6. LFOOndine LabsLesson 4
  7. VCAOndine LabsLesson 5
  8. NoiseOndine LabsLesson 6
  9. Low-pass gateTidewellLesson 7