SynthMaker Production Manual Open SynthMaker (opens in a new tab)

What is music production?

Music production is everything that turns an idea into a finished song, and it comes down to four jobs: making the sounds, arranging them, mixing them, and mastering the result.

The four jobs

1. The sounds. Every part of a song is a sound someone chose and shaped: a bass, a drum, a lead. In SynthMaker it's a patch. An oscillator makes a raw tone, a filter shapes its colour, and a VCA shapes how loud it is over time. Lift, a song played by SynthMaker, has 10 parts, each its own sound.

2. The arrangement. This is which parts play, and when. Lift is 144 bars long, at 118 beats a minute: about 4 minutes 53 seconds. Its parts never all play at once: at most 6 of the 10, and 4.8 on average. A good arrangement leaves space. A few parts, each with room, usually sound bigger than many parts fighting.

3. The mix. The mix makes the parts fit together. For each part you set its level (how loud), its place (further left or right), its tone (more or less of its lows, mids and highs; page 4) and its space (how much echo and reverb). The aim: you can hear every part you're meant to hear, and no two fight for the same spot.

4. The master. The last step works on the finished mix as a whole. It makes small changes to the tone, sets the final loudness (page 5), and keeps the loudest peaks under a ceiling, so nothing distorts on any player.

Lift's parts, added together, peak 1.9 dB over that ceiling (a dB, or decibel, compares two levels; page 3). Its master uses a limiter: a control that turns down only the few loudest moments. The finished song peaks 1.5 dB under the ceiling, and everything else is left alone.

The order isn't strict. A mix often shows that a sound needs changing. But the four jobs are a good map. Most of this course is about mixing and mastering, the least obvious two.

Listen

The same 16 seconds of Lift, three ways, all at the same loudness.

  1. 1. One sound: Lift's lead line alone. It's the whole show.0:00 / 0:16
  2. 2. Four parts: the line with the bass, kick and chords. Hear it become one voice in a conversation.0:00 / 0:16
  3. 3. Finished: the finished song, mixed and mastered. Hear the other parts fill the space around the line.0:00 / 0:16

Try it in SynthMaker

  1. Open any sound and show its Patch.
  2. The sound: follow the path from Voice through the oscillator and Filter to the VCA and the Output.
  3. A mix move: turn the VCA's level from 1 to 0.5. The sound is half as big, 6 dB quieter (page 3 shows why).
  4. Space: the effects after Voices (a Chorus or Reverb, if the sound has one) place it in a room.
  5. A tiny master: the Master at the very end has one knob, volume, and a limiter that keeps every peak just under the ceiling, so the sound never distorts.
  6. The arrangement lives in a Song: its tracks, and which patterns play when.

Where the numbers come from

  • Counted from Lift's stems and score: 10 parts, 144 bars, at most 6 parts at once and 4.8 on average.
  • Measured from Lift's stems (each part as its own audio file) and the finished song: the parts' peak when added together, and the song's peak.
  • Worked out: 144 bars × 4 beats ÷ 118 beats a minute = 4.88 minutes, which is 4:53. A level of 0.5 is 6 dB down.
  • From SynthMaker's engine: the Master's limiter.