SynthMaker

Compressor 4 U

Archive · 2010 7 old posts

From the original SynthMaker forum (2004–2014), with its members’ names and dates.

tor ·

Here is my compressor. It is in asm mostly but I have not optimized it yet. If anyone is up to that task it would be great. Otherwise feel free to use it as you like. 🙂

Enjoy

*Edit: Updated file. Changes described below in thread.

tor ·

no comments? hmmmmmm tonight i discovered that i over complicated the envelope follower and it had some errors. i tend to work and get creative when im tired. not optimal combination with maths and logic 😉 when attack is very short and you have a slowly increasing amplitude the compressor attenuated more than it should due to the program material. envelope is now fixed and simplified.

So here is a new better one: *Edit: New version in first post.

bootsy ·

you might want to check the transfer curve again, there is no compression above 0dB...

tor ·

more spesific please... do you mean if you feed the compressor with a signal exeeding 0dBFS?

bootsy ·

thats what I've meant

tor ·

i will look into it.. thanks 🙂

tor ·

Simple solution... I forgot that after adding the slew rate limiter on the attack there was no longer need for the reduction limit set by the dbrl value. This enables the compression for audio exeeding 0dBFS.

New version in first post.

Wrote something here? To have a post removed or your name hidden, write to [email protected].

Before your first post

A few rules keep this a friendly place. You agree to them once.

Shown next to what you post, here and in the app. It doesn’t have to be your real name: 3–24 lower-case letters, digits or _ (capitals become lower case, spaces become _).

    Then your post goes up straight away.

    Delete this reply?

    Open it in SynthMaker?

    It goes on the track you’re editing there, in place of that track’s sound, and into My sounds. Your other tracks stay as they are.

    Want to keep that track’s sound? Start a new song in SynthMaker first (Song › New song), then open this.

    Report this reply?

    Only the developer reads reports. The person isn’t told who reported them.

    What’s wrong with it?

    Block this person?

    You won’t see their posts and replies here any more. They aren’t told, and you can unblock them at any time.

    People you’ve blocked

    Their posts and replies are hidden from you. Unblock someone to see them again.

    The community rules

    A few rules keep this a friendly place. Everyone agrees to them once, before their first post.