SynthMaker

Hey Guys, Last Public Beta Shred 1.5x PITA!

Archive · 2010 5 old posts

From the original SynthMaker forum (2004–2014), with its members’ names and dates.

McBarGig ·

Hey Guys, I finally feel confident enough in Shred 1.5x to release a beta to the general public, away from the ABG site. Man this has been an insanely long development, too many tribulations to talk about here...

Anyways, just a few disclaimers in case we missed something and the download link is at the bottom of the the page. No manual yet, we are still writing it, sorry.

Current Version September 28 2010 1.5x97 A

WARNINGS You must remember this is a Public beta, The key word being BETA So as such use caution with your volume levels.

NEVER 1) Make any changes like selecting different components, 2) Turn effects on or off. 3) Click any switches. WITHOUT FIRST TURNING YOUR VOLUMES DOWN!! Just in case you get a volume spike.

About... These skins were created By Amit Talwar, and Manwelo Sitoy.. Other credits to follow...The credits screen is not complete, so the built in link will only take you to the artists section. The credits page is coming soon though, that is if I can finally release this thing...🙂

Current version download September 28 2010 IMPORTANT: 'Shred 1.5x97 A' Requires a complete uninstall of previous versions... Including the Read.Dat file that will be left in the Shred Install folder after uninstall has ran. Best thing to do is run the uninstall then delete the installed shred folder. However, if you have presets COPY THEM TO ANOTHER FOLDER! Then just copy them back after installing the new version.

[b]Shred 1.5x 97 A Information. It is unknown what presets saved with older versions will do. However, you will HAVE to load previous presets and re-save them with Shred 1.5x 97 A. If you do this, Shred should function without issue. However, its a beta, so you never know...

Here it is... http://dl.dropbox.com/u/923791/ShredPostings/Setups/ShredSetupBETA%201.5X97A.rar

Dell ·

Hey Mate!

This version shuts down Wavelab. It literally disappears upon the "One Moment" moniker is displayed . 🙂

In Samplitude it loads. I take it your console will not start without adjusting the "Main input" levels?

It works in Wavsaur. 803 Presets? 😮 😀

It appears once I adjusted the "Main Input" levels in Samplitude, it loads fine in Wavelab.

I'll need to install my Cubase 4 demonstration to test one of my designs. I will try yours as well and give you the status report on Wednesday.

I can see you invested a lot of time in this design. It seems to have more features than the last one in which, you encountered Cubase issues.

Cheers!

Dell ·

Right!

I carried my plug-in in additional to yours to my mates flat. He has a Windows 7 Dual core computer with Cubase 5.

He absolutely adores your plug-in. So, it works in Cubase 5.

Cheers!

trogluddite ·

Works a treat here on XP, Cubase SX3 - but I broke a guitar string again, same as when I tested out the previous version - Is this just coincidence or should I report it as a bug?! 😉

McBarGig ·

Trog, AcmeBarGig has a line of Strings coming too.. So, if you keep breaking them from Shred, then you keep buying them..Its all part of the evil plan..bwahahaha 🙂

Dell thanks for the input man, I am having a sincere issue with some standard SM stuff though in terms of the Redwirez interface. Speaking of that, if you want, redwirez has released a free Cabinet Here.. http://www.redwirez.com/free1960g12m25s.jsp?ref=home That works natively in Shred, So moving the mic and setting positions etc, identifies the right cabinet IR to load. Pretty simple stuff except for...Read on..

Not all cabinets were recorded with all mics, since this is index based, the mic selection will change when you change cabinets. What I need to do with this, is have the currently selected mic on a S&H, then when a new Cab is selected, search for the name of the mic in the newly populated list and change the index(or check) parameter of the drop down to the index where the current mic is now located. Why is such simple stuff in SM so freaking mind bending? HAHA

Wrote something here? To have a post removed or your name hidden, write to [email protected].

Before your first post

A few rules keep this a friendly place. You agree to them once.

Shown next to what you post, here and in the app. It doesn’t have to be your real name: 3–24 lower-case letters, digits or _ (capitals become lower case, spaces become _).

    Then your post goes up straight away.

    Delete this reply?

    Open it in SynthMaker?

    It goes on the track you’re editing there, in place of that track’s sound, and into My sounds. Your other tracks stay as they are.

    Want to keep that track’s sound? Start a new song in SynthMaker first (Song › New song), then open this.

    Report this reply?

    Only the developer reads reports. The person isn’t told who reported them.

    What’s wrong with it?

    Block this person?

    You won’t see their posts and replies here any more. They aren’t told, and you can unblock them at any time.

    People you’ve blocked

    Their posts and replies are hidden from you. Unblock someone to see them again.

    The community rules

    A few rules keep this a friendly place. Everyone agrees to them once, before their first post.