SynthMaker

Incompatible With Reaper

Archive · 2010 3 old posts

From the original SynthMaker forum (2004–2014), with its members’ names and dates.

Dell ·

Hi.

I am not an expert in Synthmaker designs. Possibly someone can tell me the importance of such an emblem.

This particular device (with the B’s embroided on them) can/will cause Reaper to go into oscillation.

I assumed it was my outdated version (2.0) of Reaper. I then tried the same plug-in using the latest version (3.9) of Reaper Demo and, dual-booted to Windows 7 and, the results were the same.

I bypassed the devices that offered a "B" emblem and used floats. The end result was no more oscillations in Reaper. It appears only Reaper has issues with anything offering a "B" emblem.

If anyone is having issues with their plug-ins in Reaper, and have anything in their schematic that offers the “B” emblem, it may be the root of your problem.

Cheers!

MichaelBenjamin ·

the bus system afaik only works when its static, ie no changes to the number of in/outs and no data type changes, so in this case the selector bus switch probably causes the errors. try to switch the data before/after the bus. but the reason maybe aswell something else, since i have not much experience with busses, and only used them in complete static mode for green only.

Dell ·

Cheers MichealBenjamin!

That would explain why the problem occurred once I adjusted the levels although this occurred in non-switching mode.

I stay within the green/blue region myself so, I am uncertain why it would be used in a low pass filter with an adjustable level. 😕

Wrote something here? To have a post removed or your name hidden, write to [email protected].

Before your first post

A few rules keep this a friendly place. You agree to them once.

Shown next to what you post, here and in the app. It doesn’t have to be your real name: 3–24 lower-case letters, digits or _ (capitals become lower case, spaces become _).

    Then your post goes up straight away.

    Delete this reply?

    Open it in SynthMaker?

    It goes on the track you’re editing there, in place of that track’s sound, and into My sounds. Your other tracks stay as they are.

    Want to keep that track’s sound? Start a new song in SynthMaker first (Song › New song), then open this.

    Report this reply?

    Only the developer reads reports. The person isn’t told who reported them.

    What’s wrong with it?

    Block this person?

    You won’t see their posts and replies here any more. They aren’t told, and you can unblock them at any time.

    People you’ve blocked

    Their posts and replies are hidden from you. Unblock someone to see them again.

    The community rules

    A few rules keep this a friendly place. Everyone agrees to them once, before their first post.