Pitch Bend Last Note

MichaelBenjamin · 18 Apr 2010

you mean if you sequentially hold down 3 keys and then use the pitch bend and only the last hold note should be affected? not easy if you want high poly, since order of note streams is quite random, and i would not know of a way to easily identify the last pressed voice. but if you stick with max 4 polyphony it should work, but you will need single channel asm for that which i am not very good at. basically i would read out the cntr of an envelope or a simple index counter for each of the 4 channels and then compare them to each other which is the smallest and apply the pitch bend only to that channel.

stw · 18 Apr 2010

If it should be adressed to the last note pitch you can do it with the pitch output from the midi mono prim. A simple code can assign the pitch bend to these note(s). If it should be adressed to the last note only it can be done with the voice tag eventually.

Jojo1987 · 18 Apr 2010

thanks, it works 😀

you have to check if the Pitch out from V to P equals the Pitch out from MMon and then add Pitchbend value:

streamin pitch; streamin lastpitch; streamin bend; streamout pitchout; pitchout=pitch+(pitch==lastpitch)&bend;

MichaelBenjamin · 19 Apr 2010

Jojo1987 wrote: thanks, it works 😀

you have to check if the Pitch out from V to P equals the Pitch out from MMon and then add Pitchbend value:

streamin pitch; streamin lastpitch; streamin bend; streamout pitchout; pitchout=pitch+(pitch==lastpitch)&bend;

good solution, easier than i thought.