Key code finder

Nu Audio Science · 8 Jul 2009

Whoops messed up if you downloaded already download again hehehe

NAS

AngularMomentum · 8 Jul 2009

Nice, better then the online keyfinder I am using atm... 😍

tektoog · 8 Jul 2009

thanx NAS 😉

TekTooG

aliasant · 8 Jul 2009

Sweet NAS. TY a bunch

sunsynth · 9 Jul 2009

motivated by NAS here a mod version:

Press Key or Mouse Button and get the Keycode!

philter5 · 9 Jul 2009

nice work. i have a mod ,too just select the two keys you want to combine with each other. can be used for testing , perhaps we can make a list which keys work together 🙂

phil.

philter5 · 9 Jul 2009

i tried some ways to handle two keys pressed together in one way only, means one after the other. so that if you want to use for example CTRL-M as shortcut it works only with CTRL-M and not with M-CTRL.

MichaelBenjamin · 9 Jul 2009

good tool, thank you.

philter5 · 9 Jul 2009

i have tried to make a configuration module that should make life a little easier when defining a lot of knob combos. above you see two of NAS selectors( one for the first key and one for the second key) and two testing boxes. when the box is not checked, the box is in learn mode. now you can change the first key, the second key, or both keys together. when done, just check the box and the configured keys will be stored in the box. from now on you can use it with the keys you configured. to keep the boxes as small as possible, i decided not to put a label with the current used keys on the GUi but if you hover over the module with your mouse you can see the used keys, i just put the string to a help text primitive. IF you want to change only e.g. the first key of several modules, just uncheck the boxes you would like to change, select only the first or second key, and the choosen key will be stored in all boxes in learnig mode, to use them now just check the box again and thats it. i have tested it a few times and it seems to work. phil