MidiOut it,s not work with the Hardware-Synhts

malc · 9 Jun 2005

Hi de Andy,

Sorry to hear you're having problems. Does it fail for anything you send to it? Will it not even work with note on/off? How are you generating the MIDI data - do you have a schematic you could send me? (send it to our standard email address but subtitute malc for info).

Thanks

AndydeMaro · 9 Jun 2005

malc wrote: Hi de Andy,

Sorry to hear you're having problems. Does it fail for anything you send to it? Will it not even work with note on/off? How are you generating the MIDI data - do you have a schematic you could send me? (send it to our standard email address but subtitute malc for info).

Thanks

Thanks for the answer, I Sending Email on [email removed] with my Projekt for Sending on my Hardware Midi-data..

de Andy.

malc · 10 Jun 2005

Any chance you could send it drectly to me - same as the info email address but use malc instead of info. Jorge may be out of contact for the next few days and he receives the info emails so I may not get it until Monday.

AndydeMaro · 10 Jun 2005

malc wrote: Any chance you could send it drectly to me - same as the info email address but use malc instead of info. Jorge may be out of contact for the next few days and he receives the info emails so I may not get it until Monday.

I Sending my Projekt on this Email Adresse for Testing of this Bug

de Andy..

malc · 10 Jun 2005

Ok, I think I've found what the problem is. Having looked at your schematic I'm assuming that when you press the trigger button nothing happens?

The software seems to be using MIDI channel numbers that are 1 out. So if you want to send data on MIDI channel 1 you need to use zero for the channel in your schematic. This is a bug and so I'll get this corrected so that MIDI channel 1 means MIDI channel 1. For now though, just subtract one from the MIDI channel you want and use this in your schematic.

Let me know if this works.

Also note that if you use PC Keyboard this will send data on MIDI channel 1 only (this obviously appears as zero in the software at the moment because of the bug).