SynthMaker

_W crashes when SigAnalyzer+Display update is triggered

Archive · 2005 9 old posts

From the original SynthMaker forum (2004–2014), with its members’ names and dates.

unkargherth ·

Here it is.

Anybody gets a crash with this schematic when pressing the trigger button?

malc ·

Seems fine here Unk. Does it happen every time?

Does it generate a crash report, if so can you send it to us. Thanks.

Shifrin ·

Just to add to the confusion, your schematic works fine on my machine when pressing the trigger! 😮

Shif.

Nu Audio Science ·

Fine here Unk ?

unkargherth ·

OK. Seems the probelm sometimes disappear when starting newfresh sm session with a saved file. Sometimes, but not always. Also it occurs more with non-native oscilators ( ie, pulse) than with native ones

A Tricky bit here. Yesterday, with the file i've sent, i got ner 15 consecutive crashes. but today,same file, i can't reproduce it. Anyway, i changed to a non native oscilator and generated the crash report that i've sent

Could jorge/malc confirm the reception of the crash report ? I tampered with the mail message, because with defaults options my outlook seems to not find the destination address

jorge ·

unkargherth wrote: Could jorge/malc confirm the reception of the crash report ?

We got a crash report from you, just replied to it. In general much more useful than the crash report is the .osm schematic that causes the crash so that we can recreate it.

unkargherth ·

ok. More info on this. Been tampering with the osm i post. And seems it works better by far if analyzer is ouside the display module. It don't crashes everytime and updates are inmediate (which not happened before)

Is this any help for you?

Jorge, Ill post the schematic above in this thread, but nobody (including me today) seems to be able to reproduce the error with it. Errors come as i was building the schematic , so you best option is to build a equivalent one from scrach to trigger the (possible) error. As it seems once saved and sm restarted, error sometimes disappears

jorge ·

Thanks unkargherth, that is very useful info.

unkargherth ·

OK . Seems this one solved in _X

Wrote something here? To have a post removed or your name hidden, write to [email protected].

Before your first post

A few rules keep this a friendly place. You agree to them once.

Shown next to what you post, here and in the app. It doesn’t have to be your real name: 3–24 lower-case letters, digits or _ (capitals become lower case, spaces become _).

    Then your post goes up straight away.

    Delete this reply?

    Open it in SynthMaker?

    It goes on the track you’re editing there, in place of that track’s sound, and into My sounds. Your other tracks stay as they are.

    Want to keep that track’s sound? Start a new song in SynthMaker first (Song › New song), then open this.

    Report this reply?

    Only the developer reads reports. The person isn’t told who reported them.

    What’s wrong with it?

    Block this person?

    You won’t see their posts and replies here any more. They aren’t told, and you can unblock them at any time.

    People you’ve blocked

    Their posts and replies are hidden from you. Unblock someone to see them again.

    The community rules

    A few rules keep this a friendly place. Everyone agrees to them once, before their first post.