From the original SynthMaker forum (2004–2014), with its members’ names and dates.
unkargherth ·
I know is BETA but...
It seems not respond to negative scales ok. the ouput is perfectly correct for,mfor example c0 or f#1. But if i try to obtain the MIDI note for C-2 ( two octaves below C0) it gives 48, exactly the same as C2
Another question is why it answers 81 for an a4 input, while AFAIK should be 57 ( exactly two octaves below )
unkargherth ·
As 0.9.3W it correctly outputs octave -2 ( when really should be octave -1) only for sharp notes
jorge ·
thanks unkgarherth
I'm confused, A4=81 here: http://www.mtsu.edu/~jakins/4190/4190notenumbers.html
a4=69 here: http://www.mtsu.edu/~jakins/4190/4190notenumbers.html
a4=81 here: http://www.dancetech.com/aa_dt_new/tables/pitch-freq-note.cfm
and you say that a4=57, so there's 3 versions so far. It's easy to change the code, I just need to know which is the most correct version.
The rest you mentioned is a bug, I'll fix it soon. Note to Int can be done with the parsing components too and that would be more flexible, it would allow you to change it to the behaviour you prefer.
jorge ·
here's a version of a Note to Int using the parsing components, this one you can change to your prefered behaviour:
[old link]
unkargherth ·
WEll, assume my mistake then....
As per midi Spec http://www.borg.com/~jglatt/tech/midispec.htm
Middle C = notenum 60
So then a3=69 and a4=81
My mistake was that i though A4 = 440hz, which per http://www.dancetech.com/aa_dt_new/tables/pitch-freq-note.cfm seems to be false ( A3=440 Hz, A4 = 880 Hz)
infuzion ·
* Middle c = 60 + flat + range limit of octave +/-5 (per MIDI spec)
http://rapidshare.de/files/2260953/note ... n.osm.html (open the link in a new tab/window, scroll to the bottom, then click on {Free}. The link will be on the bottom of the new page. Will expire after no downloading for 3 weeks.)
Wrote something here? To have a post removed or your name hidden, write to [email protected].
SynthMaker