SynthMaker

Matrix ghost / not showing correct vaules

Archive · 2009 1 old post

From the original SynthMaker forum (2004–2014), with its members’ names and dates.

xmidiman ·

I found a very strange problem which seems to fix it's self when you save/reload an osm. But to simplify everything, please watch the video as it explains all 3 strange problems.

Basically, I found this when I was setting up aftertouch in the matrix to a filter cutoff, and found that I could not control the filter correctly. I found, using a poly readout, that my data(aftertouch) to the filter cutoff was still 0-127 intergers(and not 0-1), which I had originally setup. No mater what I tried, I could not get back to float values, but I was able to duplicate this problem with a fresh schematic using a knob, and made a video because it can be somewhat hard to understand.

Also note that at the end of the video, you can see I deleted the line from the knob completely and it will act like it is still connected.(look at the poly readout and see it still getting data) I am using 1.1.3beta5. Not sure if in other versions. -edit I should also note, that for testing the knob's min/max is 0-127, 128steps.

Wrote something here? To have a post removed or your name hidden, write to [email protected].

Before your first post

A few rules keep this a friendly place. You agree to them once.

Shown next to what you post, here and in the app. It doesn’t have to be your real name: 3–24 lower-case letters, digits or _ (capitals become lower case, spaces become _).

    Then your post goes up straight away.

    Delete this reply?

    Open it in SynthMaker?

    It goes on the track you’re editing there, in place of that track’s sound, and into My sounds. Your other tracks stay as they are.

    Want to keep that track’s sound? Start a new song in SynthMaker first (Song › New song), then open this.

    Report this reply?

    Only the developer reads reports. The person isn’t told who reported them.

    What’s wrong with it?

    Block this person?

    You won’t see their posts and replies here any more. They aren’t told, and you can unblock them at any time.

    People you’ve blocked

    Their posts and replies are hidden from you. Unblock someone to see them again.

    The community rules

    A few rules keep this a friendly place. Everyone agrees to them once, before their first post.