From the original SynthMaker forum (2004–2014), with its members’ names and dates.
Dave ·
Hi,
i'm not familiar with effects (only created instruments in the past)...
So why does this not working (i want to create a simple filter effect):
Outside:
Inside:
It's strange that all other effect modules got mono in- and outputs and the filter one not 🙁
ps: I know there's a small mistake to by routing the stereo signals together into the filter.
MichaelBenjamin ·
change the mono2poly and the combiner to a pack/unpack and set the filter module to mono4. white streams are only active when you play a midi note, for an effect you need to use mono or mono4.
TomC ·
MichaelBenjamin wrote: change the mono2poly and the combiner to a pack/unpack and set the filter module to mono4. white streams are only active when you play a midi note, for an effect you need to use mono or mono4.
Normal stream connectors (same shape as the poly connectors, but more greyish color) work fine.
Tom
exonerate ·
Yes, get rid of the mono to polys and poly to monos, and just connect the filter straight to the mono connectors the filter will then switch to mono.
The greyed out connectors are "stream" connectors which can be either mono or poly, they will change to either depending which you connect to.
Have a read of the manual...... Section 5 Data Types & Signal Flow .
Cheers 😉
Exo
Wrote something here? To have a post removed or your name hidden, write to [email protected].
SynthMaker