From the original SynthMaker forum (2004–2014), with its members’ names and dates.
NekroDisko ·
Hello. I just encountered something quite strange. When I try to use a mono sine-oscillator for 2 separate purposes, which is, connecting a mult x1000 to a switch to the phase-input to make it work as a noise oscillator at one selection, and as a normal sine at another, S|M crashes. Is there a conflict between the feedback into the phase and the "normal" phase? I have even tried to disconnect the "normal" phase link and the same happens. Wierd and annoying! 😠 😮
exonerate ·
A picture or osm would help alot.
cheers 😉
Exo
NekroDisko ·
Ok, here´s a picture of the issue. The crash happens when I try to link the second selectors output to the phase-input. Thanx in advance! 🙂
NekroDisko ·
I found a workaround! I just put a mono2poly in between the selector and to the poly2mono connected to the phase-input and all worked fine. But, it might be something to look at, all the same. Thanx! 😀
infuzion ·
NekroDisko wrote: I found a workaround! I just put a mono2poly in between the selector and to the poly2mono connected to the phase-input and all worked fine. But, it might be something to look at, all the same.
You're really not supposed to directly connect Poly & Mono connections without the use of the translator component.
Acrobat ·
Mmh, with those weird connections, the less you can expect is a bug.. "Mono 2 Poly" works well but has always been a little hacky module..😉
Wrote something here? To have a post removed or your name hidden, write to [email protected].
SynthMaker