SynthMaker

Need SP3T toggle switch

Archive · 2008 5 old posts

From the original SynthMaker forum (2004–2014), with its members’ names and dates.

craiglindley ·

Before I reinvent the wheel anyone out there have a SP3T switch they would be willing to share?

TIA Craig Lindley

Hlis93 ·

is that a switch with 3 positions? I have a graphic for it then, but I havent a control for SM.

oddson ·

Easily achieved with stock controls (using the properties dialog) and either the selector or the multiplexer, depending on whether you're selecting or directing the flow...

Nu Audio Science ·

The way i do it is slightly different to Oddson but similar hahahaha Make a 3 cell knobstrip with the three switch positions Load this onto the animated knob Now change the steps to 3 and the min/max will be divided by the three switch positions so if you want 0/1/2 you would put in min 0 max 2

Now if this is a horizontal switch that you are trying to achieve you are going to need to go inside the knob schematic and staright swap the drag Y component for a drag X

OK if you have a very simple switch that actually has the same switch graphic sliding along a single background like SMs standard on/off switch it is even easier

Just load the switch graphic into the horizontal slider as the slider bitmap And load the background in as the track Now put the steps on 3 and change the min max to whatever is needed like above 😉

NAS

craiglindley ·

Great ideas all. I'll give them a try.

Thanks

Wrote something here? To have a post removed or your name hidden, write to [email protected].

Before your first post

A few rules keep this a friendly place. You agree to them once.

Shown next to what you post, here and in the app. It doesn’t have to be your real name: 3–24 lower-case letters, digits or _ (capitals become lower case, spaces become _).

    Then your post goes up straight away.

    Delete this reply?

    Open it in SynthMaker?

    It goes on the track you’re editing there, in place of that track’s sound, and into My sounds. Your other tracks stay as they are.

    Want to keep that track’s sound? Start a new song in SynthMaker first (Song › New song), then open this.

    Report this reply?

    Only the developer reads reports. The person isn’t told who reported them.

    What’s wrong with it?

    Block this person?

    You won’t see their posts and replies here any more. They aren’t told, and you can unblock them at any time.

    People you’ve blocked

    Their posts and replies are hidden from you. Unblock someone to see them again.

    The community rules

    A few rules keep this a friendly place. Everyone agrees to them once, before their first post.