SynthMaker

4Osc Synth

Archive · 2007 5 old posts

From the original SynthMaker forum (2004–2014), with its members’ names and dates.

Neptune ·

Hi,

i´m working on a 4 Osc Synth atm and kindly ask you for feedback about this first Alpha.

Still Unnamed

Going to post the osm as soon as i have access to my share-drive again.

Thanks in advance!

Nep

tention ·

Hello Neptune,

i found some strange things in your synth. First: there are many clicks, probably caused from the signal route of the AMP ADSR. If you haven't already, try to put the AMP ADSR after the filter module or try to set a minimum value for Attack and Release.

Second: The filter resonance should be limited to for example 0.98 to avoid such a heavy res when having res=1 and cutting off.

Third: It would be nice to have more controls for the 4 oscillators, something like detune or spread, phase etc..

Keep up the work...

Neptune ·

Hi Tention,

i solved the problem with the clicks. It was caused by a wrong connection to the equalizer. I had a double connection in there. One directly from both Filters and the other link was from the AMP ADSR.

After removing the double connections no more clicks at the beginning nor at the end appear.

Now also the AMP ADSR works as it should but i have to setup all presets again 🙂 since the double connections caused a kind of gain effect automatically.

Since i´m working with the "Osc using SM´s 256 wavetable" (found it in the forum or on the wiki [cant remember]) i did not put it onto the UI since i was too lasy to modify its colors yet. But i´ll rework the UI and will insert all 4 OSCs with their detuners on it. I also want to modify the detuners first to get higher and lower octaves to work with.

Thanks for your help!! (Vielen Dank! Bin erst nach Deinen Hinweisen auf die Fehlerquelle gekommen. Grüsse aus München).

Going to post the reworked osm soon.

Nep

Neptune ·

Here is the reworked osm of the synth

osm

Nep

infuzion ·

Ah, you added the OSC part! Looks cool, but I'm not sure how to use it.

For me, I prefer synths to suggest their audio flow by their layout, so the OSC would be on the far upper-left, hopefully with some kind of flow indicators (Like Thor, but there are other methods). I perfer also a smaller layout, but I also hope for longer sliders for the OSC for finer tuning.

Some more richer, deeper base-y patches would be good also. I'd make some, but I need to make a mix CD in 2 days.

Wrote something here? To have a post removed or your name hidden, write to [email protected].

Before your first post

A few rules keep this a friendly place. You agree to them once.

Shown next to what you post, here and in the app. It doesn’t have to be your real name: 3–24 lower-case letters, digits or _ (capitals become lower case, spaces become _).

    Then your post goes up straight away.

    Delete this reply?

    Open it in SynthMaker?

    It goes on the track you’re editing there, in place of that track’s sound, and into My sounds. Your other tracks stay as they are.

    Want to keep that track’s sound? Start a new song in SynthMaker first (Song › New song), then open this.

    Report this reply?

    Only the developer reads reports. The person isn’t told who reported them.

    What’s wrong with it?

    Block this person?

    You won’t see their posts and replies here any more. They aren’t told, and you can unblock them at any time.

    People you’ve blocked

    Their posts and replies are hidden from you. Unblock someone to see them again.

    The community rules

    A few rules keep this a friendly place. Everyone agrees to them once, before their first post.