From the original SynthMaker forum (2004–2014), with its members’ names and dates.
b_ara_ki ·
hi
I am trying to build a freq splitter I know there is one but I need to split the audio to 5 bends and I can do the gui for this can any one help me with this?
its the same like the three bend but its for 5 bend split even a tip can do !!
thanking you in advance.
oddson ·
bend? 😕
stefan ·
Band 🙂
b_ara_ki: look inside the compressor module, there's a two-band splitter there. If cascade a bunch of those you can split the signal up in as many bands as you like.
b_ara_ki ·
i know this the problem is to make a graphic interface to control the split points
stefan ·
Then you need to be more specific. What exactly is the problem? What do you want the control to look like?
Have you seen this? Might be close to what you're after!
Cheers!
b_ara_ki ·
http://www.box.net/shared/s2kirkakrg
its need to function the same like the one in the link but to split to 5 bands
stefan ·
Have you tried altering the one on the wiki? If so, where did you run into problems?
stefan ·
Have you tried altering the one on the wiki? If so, where did you run into problems?
If you just want a finished GUI control made by someone else there might be someone willing to do it for you if you ask nicely, lots of skilled people here 🙂
exonerate ·
Ok i had a quick look at turning the splitter into five bands, and this is the result...
http://www.box.net/shared/el21v3cr0n
I pretty much just threw it together so it's a bit of a mess in places and I've not updated the properties page so if you want to change the colours ect..... you'll have to do a treasure hunt to find the colour components 😉
Basically if you look inside you'll see that I've just copied and pasted another two 'mid band' modules which gives you the extra bands between the low and high band, then I've also copied the 'control' modules.
The little mess in between the 'control' modules ensure that the points cannot go past each other.
cheers 😉
Exo
b_ara_ki ·
thank you very much !
its just the thing I was looking for. 😀 😀 😀
Wrote something here? To have a post removed or your name hidden, write to [email protected].
SynthMaker