SynthMaker

SuperSaw Detuner

Archive · 2007 6 old posts

From the original SynthMaker forum (2004–2014), with its members’ names and dates.

AndydeMaro ·

Hello

I work on SuperSaw_detuner, is this ok:

See the Pic:

Or is BadCode ??????

de Andy

stefan ·

The upper "detune value" gets multiplied with zero, is this by purpose?

infuzion ·

stefan wrote: The upper "detune value" gets multiplied with zero, is this by purpose?

Even if that was fixed, I would think then the first Saw would cancel out the 3rd, since one is the - of the other added together.

stefan ·

infuzion wrote: stefan wrote: The upper "detune value" gets multiplied with zero, is this by purpose?

Even if that was fixed, I would think then the first Saw would cancel out the 3rd, since one is the - of the other added together.

What? No. With that fixed it should work, you'd end up with these three saws:

basefreq basefreq - detune basefreq + detune

if basefreq is for instance 440hz and detune is 10hz, you'd get 430, 440 and 450hz. The two saws at 430 and 450 won't cancel out 🙂 That only applies when the use the same frequency and different phase.

infuzion ·

Oh, I was thinking wrong; thanks for the correction.

AndydeMaro ·

infuzion wrote: Oh, I was thinking wrong; thanks for the correction.

Can To me Pic Posten for the Problem of my SuperSaw_Detuner, Thanks

Wrote something here? To have a post removed or your name hidden, write to [email protected].

Before your first post

A few rules keep this a friendly place. You agree to them once.

Shown next to what you post, here and in the app. It doesn’t have to be your real name: 3–24 lower-case letters, digits or _ (capitals become lower case, spaces become _).

    Then your post goes up straight away.

    Delete this reply?

    Open it in SynthMaker?

    It goes on the track you’re editing there, in place of that track’s sound, and into My sounds. Your other tracks stay as they are.

    Want to keep that track’s sound? Start a new song in SynthMaker first (Song › New song), then open this.

    Report this reply?

    Only the developer reads reports. The person isn’t told who reported them.

    What’s wrong with it?

    Block this person?

    You won’t see their posts and replies here any more. They aren’t told, and you can unblock them at any time.

    People you’ve blocked

    Their posts and replies are hidden from you. Unblock someone to see them again.

    The community rules

    A few rules keep this a friendly place. Everyone agrees to them once, before their first post.