SynthMaker

knob animation bug?

Archive · 2007 3 old posts

From the original SynthMaker forum (2004–2014), with its members’ names and dates.

tonquader ·

hello, is again here and straight found to synthmaker full joy than alternative too scope sdk.

I provided the animations with stitchstudio. seems more synthmaker the animations easily to shift. if I turn the button completely to the right, are the errors away. I turn it to the left, a half pixel appears at an edge of the edge opposite. if I increase the animation, the errors are not to be seen. can that be of more synthmaker a bug? even with that original button is to be seen the error! as represented in the pictures. the error is however amusing wise not with all animations.

that does not look now so dramatic, if one however buttons turns sees one that immediately! with alphachannel I cannot work because that would blow up the data set with 16000 frames. can one go around that somehow? if not were that very unfortunate, plug in with scope did not finish sdk, because of such small proplemen.

HP: sorry for my bad English, must a translator use. my English ensures again and again for laugh.

http://www.directupload.net/file/d/988/3F2VBXci_jpg.htm http://www.directupload.net/file/d/988/J33W9qzp_jpg.htm http://www.directupload.net/file/d/988/6SHpwJPH_jpg.htm http://www.directupload.net/file/d/988/KPGH6B7m_jpg.htm

sunsynth ·

Hi tonquader,

welcome and here my answer:

The original AM-Knob has a fragment on the bottom in the vertical-Png-Strip - you found it!

All you have to do is to accurately center your knob-picture!!!

And don't forget: use an exact square like 64x64 pixel...

SUNsynth

tonquader ·

waahhhh! thanks for the fast answer!

the rectangle mass are all not accurately , 120 animations to again cut. 🙁

Wrote something here? To have a post removed or your name hidden, write to [email protected].

Before your first post

A few rules keep this a friendly place. You agree to them once.

Shown next to what you post, here and in the app. It doesn’t have to be your real name: 3–24 lower-case letters, digits or _ (capitals become lower case, spaces become _).

    Then your post goes up straight away.

    Delete this reply?

    Open it in SynthMaker?

    It goes on the track you’re editing there, in place of that track’s sound, and into My sounds. Your other tracks stay as they are.

    Want to keep that track’s sound? Start a new song in SynthMaker first (Song › New song), then open this.

    Report this reply?

    Only the developer reads reports. The person isn’t told who reported them.

    What’s wrong with it?

    Block this person?

    You won’t see their posts and replies here any more. They aren’t told, and you can unblock them at any time.

    People you’ve blocked

    Their posts and replies are hidden from you. Unblock someone to see them again.

    The community rules

    A few rules keep this a friendly place. Everyone agrees to them once, before their first post.