SynthMaker

NEW SYNTH RELEASE- BV21 Draw+Morph

Archive · 2007 4 old posts

From the original SynthMaker forum (2004–2014), with its members’ names and dates.

billv ·

OSM and dll.- Available at http://users.tpg.com.au/billv

ZAZAS ·

😕

billv ·

Sorry mate, i forgot to up-load it. It's up now and all good. Note; I downloaded the dll. on a different cpu and found that The 80 pre sets for draw wave did't save with synth. Working on that now. This synth sounds crap compared to others i'm working on-so it became a GUI experiment. I think the morphing modifications I did are to blame. Normally the draw waves sound great. http://users.tpg.com.au/billv

exonerate ·

nice synth i like the unsual way of controling everything and the gui look's cool 😉

not sure why you have an ADSR graph on everything cos i've not seen an an ADSR although i might be missing something,

as for it sounding crap, one of the reasons will be that your adding 0.5 to the value from the control so when the control get's to 1, your actually multiplying the array by 1.5, so when you've got a wave like a square where the first half of the point are all at 1 there actually at 1.5 which mean's there above nquist which would cause aliasing, but i think that because the waveread is bandlimited your probaly getting a little bit of aliasing with a loss of harmonic's.

you don't what to add anything to the value of the control un less the control only goe's up to 0.5 so it would never go above 1.

the best way to do it would be just to minus 1 from one of the values and leave the other alone then you would get a complete morph between the two.

anyway i hope this help's 😉

Wrote something here? To have a post removed or your name hidden, write to [email protected].

Before your first post

A few rules keep this a friendly place. You agree to them once.

Shown next to what you post, here and in the app. It doesn’t have to be your real name: 3–24 lower-case letters, digits or _ (capitals become lower case, spaces become _).

    Then your post goes up straight away.

    Delete this reply?

    Open it in SynthMaker?

    It goes on the track you’re editing there, in place of that track’s sound, and into My sounds. Your other tracks stay as they are.

    Want to keep that track’s sound? Start a new song in SynthMaker first (Song › New song), then open this.

    Report this reply?

    Only the developer reads reports. The person isn’t told who reported them.

    What’s wrong with it?

    Block this person?

    You won’t see their posts and replies here any more. They aren’t told, and you can unblock them at any time.

    People you’ve blocked

    Their posts and replies are hidden from you. Unblock someone to see them again.

    The community rules

    A few rules keep this a friendly place. Everyone agrees to them once, before their first post.