SynthMakerGaryG ·
i can't get the knob stitcher schem working, it looks like i've connected everything as per the instructions but no copied knob.
anyone care to point out my dumb mistake? 🙂
cheers, .g
http://www.snadsie.f2s.com/stitch_test.osm
Knob Stitch malarky
From the original SynthMaker forum (2004–2014), with its members’ names and dates.
skOre ·
I'm on it.
skOre ·
First off - you have a double redraw: disconnect the second input to the DragX set. This will get you rid of the flickering.
Second: OMG to parent and to child connectors!
replace those with send and receives. How embarassing 😉 Please make sure to use the
Third: Make a View in on the knob you want to copy and connect this to the MGUI and then connect the CopyKnob (V) to the gzknob6 (V).
Fourth: You have a max set right at the DragX - big no-no! Its also strangely connected to the components height! Make that max to 1 and then multply the Ratio by three. You will have to figure out how to make the drag work together with that.
Come back for more 😉
GaryG ·
Thanks a lot skOre,
Maybe I should have been choosier with which knob I loaded to experiment with, this is obviously an old one, maybe even one of my first...
I'll try not to embarass myself in public again.
🙂
.g
electrogear ·
i can't get the knob stitcher schem working, it looks like i've connected everything as per the instructions but no copied knob.
anyone care to point out my dumb mistake?
cheers, .g
Where are these instructions you speak of? I'd like to have a go from scratch. Make sure I know what's going on in every part,
Cheers,
Mike
skOre ·
Right beside the modules in the audiooak module pack.
electrogear ·
Aha.... which I have to buy right?
angstrom ·
follow the big link in his sig
skOre ·
😀
electrogear ·
Thankyou very much indeed. Very helpful! May subscribe to your website when I start getting somewhere. Pretty pointless at the moment as I'm just learning the basics.
Cheers,
Mike
Wrote something here? To have a post removed or your name hidden, write to [email protected].