From the original SynthMaker forum (2004–2014), with its members’ names and dates.
phertel ·
When I made a Synthesizer VST Modul it works fine in SM. SM works at 44.1kHz Sampling Rate. Now, if I use it in FruityLoops, the Modul is a half tone to high while FL works with 48kHz.
regards Peter
PS: I use the SM 0.9.5.w.1 and FL6Producer Ed at a Pentium IV 2,5GHz 512MB Ram and SB Audigy2 with ASIO
stefan ·
phertel wrote: When I made a Synthesizer VST Modul it works fine in SM. SM works at 44.1kHz Sampling Rate. Now, if I use it in FruityLoops, the Modul is a half tone to high while FL works with 48kHz.
regards Peter
PS: I use the SM 0.9.5.w.1 and FL6Producer Ed at a Pentium IV 2,5GHz 512MB Ram and SB Audigy2 with ASIO
Could you send me your schematic? I'll PM my e-mail address.
Kingston ·
You can report host samplerate to your plugin.
If there are *any* samplerate dependant modules or coefficients in your schematic, you need to compensate for them with different samplerates. You need to use the timing module for this, and create a compensation macro or algorithm for your dependant modules.
phertel ·
Hello @all I have found the most important difference between SM-standalone and SM-FL-edition! 😈 My old Problems I had by some early Versions of SM-standalone are in the FL-Edition back!!! Hurray!!! 😇 I'm sooo Happy!!! 😠 When I work with 44kHz Sampelrate it works god. But my ASIO-Environment work best at 48KHz. Then the SM-FL-Edition Modules are all detuned by a halftone. My Modules I made with the SM-stand alone Vesion as a VST are working correct with the newest Version of SM-standalone.
best wiches Peter
malc ·
I will look into it. Thanks for letting us know.
Wrote something here? To have a post removed or your name hidden, write to [email protected].
SynthMaker