From the original SynthMaker forum (2004–2014), with its members’ names and dates.
sluggo ·
Hello,
I have a module with a gui which isn't showing up in the parent module. If someone could take a look at my file and help point me in the right direction, that would be great.
http://www3.telus.net/sluggo/synthmaker/jup.osm
synth module -> saw -> supersaw
supersaw has some dials, but isn't showing up in saw
compare to:
synth module -> saw -> supersaw -> detune modules
the detune modules show up in supersaw, as does the label
so I don't understand why the detune modules will show up in its parent but the supersaw module won't show up in its parent
thanks
malc ·
I'll have a look.
malc ·
Ok, I've had a look but Jorge has too and he's going to reply. You might want to look at the new GUI documentation which is now online.
jorge ·
Hi sluggo
sluggo wrote: I have a module with a gui which isn't showing up in the parent module. If someone could take a look at my file and help point me in the right direction, that would be great.
You have one ToParent component missing in your schematic, it should be as follows:
You should also resize the module that you see selected in the following screen capture otherwise it will appear clipped higher up in the main front panel:
Shifrin ·
I see I'm not the only one playing with 'super' saws 😉
Shif.
sluggo ·
Got it, thanks.
I had put a "to parent" module in the saw module, expecting that to work. Now it makes sense: "to parent" in supersaw makes supersaw show up inside saw when on the synth page.
s.
Tom7777 ·
The first thing i did was try and make a decent super saw 🙂
Wrote something here? To have a post removed or your name hidden, write to [email protected].
SynthMaker