Wave Display

sambean · 18 Apr 2006

Welcome to SM!

Some components are still classes as R&D, these are configured to be turned off intially, from the preferences menu you can switch them on.. There you'll find those missing..

Poly2Graph only shows what the first 2048 samples of poly audio would be following a note on.. Mono2graph can be used to continually monitor a mono audio path..

The wave Display module in the controls isn't a GUI element so can't be used as such, I can't remember rightly if their is one, if not try using the one in the wave draw module..

Have fun! 😀

Cheers

Sam

aetmos · 18 Apr 2006

Welcome to SM!

Thank you.

Some components are still classes as R&D, these are configured to be turned off intially, from the preferences menu you can switch them on.. There you'll find those missing..

Ah, got it. Unfortunately, it still isn't working for me...From the image in the other thread, I think this is what I'm supposed to do, right? Why am I not getting a waveform in the display?

The wave Display module in the controls isn't a GUI element so can't be used as such, I can't remember rightly if their is one, if not try using the one in the wave draw module..

hmm...not sure how to do that, either...sorry, I'm a bit new... 😉

Thanks, Tom

rl · 18 Apr 2006

try to disconnect the upper blue wire from the synth to the StereoClip and connect the out of the MonoToGraph to the StereoClip instead, so the signal chain is synth->MonoToGraph->StereoClip. (At least this works for me)

Shifrin · 18 Apr 2006

It looks to me like you've connected the Trigger output of the Ticker25 to the Graph input of the Display - when in fact it should be connected to the Trigger input of the Display 😉

Shif.

angstrom · 18 Apr 2006

Shifrin wrote: It looks to me like you've connected the Trigger output of the Ticker25 to the Graph input of the Display - when in fact it should be connected to the Trigger input of the Display 😉

Shif.

heh heh, care to point at the trigger input of the display on his schematic 😉

It doesn't have one. just graph and float .. and Malc has indeed indicated that the trig should be connected to the graph input in the thread linked

from the original thread...

malc wrote: Ok, I've had a look now Shif. The Poly To Graph component only calcluates the first 2048 samples, hence the static graph. What you need is the Mono To Graph. Ok, so you're not looking at mono but it will still work for poly (this should really be stream to graph).

When you connect the graph output to the wave display you'll need to hook up a Ticker25 to the wave display's graph input as the Mono To Graph only updates the graph data, it doesn't send a trigger.

Here's an example:

Download Schematic

Note that when a Mono To Graph is in a poly section you will only see data for the first channel.

to the thread starter ... have you down,loaded the schematic that is linked at the bottom there?

aetmos · 18 Apr 2006

try to disconnect the upper blue wire from the synth to the StereoClip and connect the out of the MonoToGraph to the StereoClip instead, so the signal chain is synth->MonoToGraph->StereoClip. (At least this works for me)

Okay, yeah that works for me. Is there any way to get the graph not to normalize the values, though?

to the thread starter ... have you down,loaded the schematic that is linked at the bottom there?

Heh...nope, I missed that 😮. That one works for me too, but the values also appear to be normalized...

Out of curiosity, is there a way to put a waveform graph like this on the front panel of an effect?

Thanks, Tom

sambean · 18 Apr 2006

On the Wave Display module you can input a float to specify the +/- range..

The wave display doesn't work in a GUI/front panel though..

This does though 😉....

http://magalov.myweb.hinet.net/toolkit/WaveView.osm

It takes mono input and draws wave..

Number of points and colour scheme are adjustable from the properties.. This has just been extracted and doctored from the current wave draw module..

Cheers

Sam

aetmos · 18 Apr 2006

Wow, that's awesome. Thanks, man!

Shifrin · 19 Apr 2006

angstrom wrote: heh heh, care to point at the trigger input of the display on his schematic 😉

My bad 😊

I've had a hard week 😈

Shif.