Problem with Sampleplayer

jorge · 14 Mar 2006

Hi Macrontec and welcome to the forum.

Try using a Stereo Amp with low volume as follows:

let me know if it fixes the problem.

sambean · 14 Mar 2006

Welcome!

There may be a miscalculation in your rho value, replace it 1 and check if it works, if it does then it means you may need to re-do the calculation..

If that is not it, make sure you are using the stereo read file with a stereo file and the mono read with the mono file..

Hope you get it sorted

Cheers

Sam

jorge · 14 Mar 2006

You're reading your wave without interpolating, here is what it looks like:

That result is correct for what your schematic does, you need to add interpolation to get the result you want.

jorge · 14 Mar 2006

Here is a version of your schematic that interpolates one channel but not the other so you can look at the difference:

[old link]

oddson · 14 Mar 2006

That looks like it was based on an example I posted earlier in 'help'.

In that post I said it used "naive interpolation (nearest sample)". Technically, since interpolation means to estimate a value in a series based on neigbouring data points, this is not incorrect. But in practice one might assume interpolation means some effort was made to estimate based on an assumption of a smoothly changing function.

Sorry for the confusion...

Macrontec · 14 Mar 2006

wow .. great .... i am enthused

good forum , thanks all from Austria