From the original SynthMaker forum (2004–2014), with its members’ names and dates.
sambean ·
Just a little offering..
Another thread inspired me to dig out and finish off an old module I was working on.. Based loosely on a harmoniser (look at Google Books: 'DAFX' p220 for schematics) what you get here is two versions of the module: one low quality stereo version and one higher quality mono version. Both work the same: the amount specifies the pitchscale +1 to -1 octaves. Also because of the delays there is a 2000 sample latency with the plugs.
I've made an example chorus using 4 of the harmonisers so you can see them in action 🙂
Thought I should say, I can't download this file ATM, I get the following after a directory listing :-
SambeanChorus.osm 12-Jan-2006 05:00 0k
Looking forward to hearing it 😉
Cheers,
Shif.
Shifrin ·
Oh yeah, I had no idea there was a 'Google Boooks' - thanks for the 'heads-up' 😀
Shif.
Tom7777 ·
The link doesn't seem to be working sambean
sambean ·
Sorry chaps..
I'm having a problem with the webspace at the moment it seems.. 🙁
I'll try to sort it out later
Sam
EDIT: Fixed! Download now working
sambean ·
Shifrin wrote: Oh yeah, I had no idea there was a 'Google Boooks' - thanks for the 'heads-up' 😀
Shif.
It's a pretty good resource, there's lots of academic/DSP books available. Couple of downsides, it's quite fiddly to use, sometimes the diagrams are to small and some of the 'important' pages are blanked out.. It's just to prompt you to buy the book I suppose.. But nonetheless it's pretty good for free.. the DAFX book in particular is pretty useful, lots of insights into common FX and such.
Sam
Shifrin ·
Cheers Sam I've got the schematic now 🙂
I was surprised at the amount of DSP and related books at the Google Books site, as you say some pages are blocked out - but it's a great resource nonetheless!
Shif.
Tom7777 ·
Thanks sambean 😀
infuzion ·
Thanks sam
Sounds neat at a low Rate, but gets an awful vibrato sound when increased. Much better if the Contol to Freq after the Rate knob isn't mulitplied by 3 before the Float Power IMHO.
sambean ·
Thanks for having a listen chaps..
Infusion: I also noticed later I was getting a vibrato from the envelopes in the harmoniser module, regardless of what frequency the rate was set at.. Here's a slight modification with each of the harmonisers delay buffers set to a different size, I've also reduced the maximum rate as you suggested..
SynthMaker