From the original SynthMaker forum (2004–2014), with its members’ names and dates.
distante ·
Hello everyone, this my first of (I hope) many post here!
I'm trying SynthMaker to made a project for my institute, but well, after a couple of hours messing with the modules and reading the Manuals I have a doubt.
There's anyway to launch a Xhz test tone inside SynthMaker so I don't have to export to vst and load the plug in the DAW and hear the noise burst....
I'm trying to add an some Harmonic content to a signal, so I need to try send the Test tone and see how my algorithm is working.
Thank you!
oddson ·
For a constant tone:
You can use the Wave Player for wave playback, or you can build a rudimentary synth with some kind of automated note repeat if you need envelope.
philter5 ·
hey welcome to SM land 😉
i made a really simple test tone generator a few years ago.
you can find it here:
simple test tone generator
it is VERY basic, means you can only switch the tone on and off, when switched ON it will play a Sinewave at 440 Hz
at full Volume.
there are more complex "test-tone-generators" available here in the forum, but i am sure after having some deeper looks
inside some examples you can really soon create your own one with all the options you need 🙂
EDIT: hehe, oddson was faster with the answer 😀
distante ·
Hey! Thank you guys for the help!
@oddson
I tried the setup that you showed but I can't figure it out how to "make it sound"
@philter5
Your osm sounds! but I can't copy it to my session and/or imported (I can't find the option)
😝
cyto ·
distante wrote: I tried the setup that you showed but I can't figure it out how to "make it sound"
Do you have either a "direct sound out" or "asio out" module in your schematic? In order for the mono (blue) section to be processed, you need to have one of these in there and activated.
-cyto
distante ·
cyto wrote:
distante wrote: I tried the setup that you showed but I can't figure it out how to "make it sound"
Do you have either a "direct sound out" or "asio out" module in your schematic? In order for the mono (blue) section to be processed, you need to have one of these in there and activated.
-cyto
hahaha stupid me! I had a DS out module in the end, I changed for an ASIO OUT (like in the philter5 test tone osm) and now it sounds!!!!
Thank you for the help! I will be continued bunging around here :P
Wrote something here? To have a post removed or your name hidden, write to [email protected].
SynthMaker