SynthMaker

Wierd midi problem.

Archive · 2012 3 old posts

From the original SynthMaker forum (2004–2014), with its members’ names and dates.

machielve ·

Hello all. I have a problem with some MIDI signals, i have already asked it over at the general section ( Wierd midi problem. ) and they said i would be better if i asked it here at the help section.

So here i go again.

Attached is the NRPN maker for the delay depth. It receives at value between 0 and 127 and creates a NRPN message out of it. There are 3 ways to send that value. 1. Use the mouse to turn the knob. 2. Use a midi controller or DAW automation to turn the knob. 3. Use a midi controller or DAW automation to send the CC value directly in the NRPN maker.

But the only way to get midi out of the NRPN maker is when i use the 1ste methode. And where it goes wrong is in the midi event module. Before that, it is the correct value when i use alle the methods, but after the midi event module it only changes when i use methode 1.

Tzarls ·

The trigger delay module could be causing problems - don´t know if it´s causing all the problems you have, but it´s trouble indeed.

It has to do with how the threads are managed in SM. The the fact is that when the timer primitive receives a trigger from an incomign MIDI signal, it won´t output any trigger, so it won´t trigger the third MIDI event primitive.

Search for "de-threader" in the forum, that should solve this particular problem, and maybe the whole issue.

machielve ·

OMG thank you very much, this fixed it for me. Why is it alwasy the little things that can cause problems.

Wrote something here? To have a post removed or your name hidden, write to [email protected].

Before your first post

A few rules keep this a friendly place. You agree to them once.

Shown next to what you post, here and in the app. It doesn’t have to be your real name: 3–24 lower-case letters, digits or _ (capitals become lower case, spaces become _).

    Then your post goes up straight away.

    Delete this reply?

    Open it in SynthMaker?

    It goes on the track you’re editing there, in place of that track’s sound, and into My sounds. Your other tracks stay as they are.

    Want to keep that track’s sound? Start a new song in SynthMaker first (Song › New song), then open this.

    Report this reply?

    Only the developer reads reports. The person isn’t told who reported them.

    What’s wrong with it?

    Block this person?

    You won’t see their posts and replies here any more. They aren’t told, and you can unblock them at any time.

    People you’ve blocked

    Their posts and replies are hidden from you. Unblock someone to see them again.

    The community rules

    A few rules keep this a friendly place. Everyone agrees to them once, before their first post.