From the original SynthMaker forum (2004–2014), with its members’ names and dates.
tester ·
I'm having a small problem here. Input provides max value (converted then to min and max), output is in (0-1) range. Slider and editbox plus ratio-based conversion between them seem to work fine (1 = center, +/- represents right and left direction, sides = zero).
Counter-based arrows are one-step value adders (add/sub 1% depending on direction) and are connected only to slider, so they don't deal with editbox ratio philosophy. Yet while they work correctly in increasing direction (slider stops when max is reached), in decreasing direction - when reached min - main value and slider resets to max and slider starts to decrease from right to down again.
How to fix it?
Mo ·
tester wrote: How to fix it?
The negative zero and positive zero seems the same. Subtract a very small value when the value is negative to make "0" to "-0" and the compare functions will work as intended. Also many unnecessary triggers coming from the step counter, i think the counter is not needed. Also the edit box is buggy and change the value when pressed but not edited.
Here is the fix:
tester ·
Thanks. I'm reediting older stuff, and sometimes simply don't see what's left from previous thinking 🙂
The editbox is made to send values only when they are accepted (as far I remember it was your design?). Otherwise all edit operations, like typing numbers - would produce immediate output changes during typing. Which can be really confusing 😉
Mo ·
Yes, move the "Float clip" module from the slider and place it just after the edit box before "ratio to freq" and make the range -1 to 1.
Wrote something here? To have a post removed or your name hidden, write to [email protected].
SynthMaker