From the original SynthMaker forum (2004–2014), with its members’ names and dates.
tester ·
I thought I solved the problem, but unfortunately not.
I added to my slider +/- (step arrows) modifications from another forum project, but I encountered a problem. Everything works fine, except one thing. When I change the "base" value (type and enter) - slider resets to zero if the adjustement was made with slider (and not arrows). I know that this comes from my dynamic "range" that is each time send to the slider (bottom end; it becomes important for slider scaling when values are around zero), but I don't know how to fix it or change it (trigger blocker there produces unexpected effects when crossing zero). Cold someone take a look?
tester ·
Okay, I think I found a working solution. When I send back the slider output to its input (via last state switch), then everything seems to go back to normal. Looks that somewhere some hidden trigger needs to be overrided.
Mo ·
It seems the input to the "tune range" module is unnecessary.
tester ·
This additional input is for scaling slider behaviour around zero values (base) and at ranges higher than base. Type for example the "base" = zero and move slider across the +/- range. You will notice, that with this additional input - zero is never above the bottom point of the slider. Without it - values are reaching zero somewhere in the middle of the slider, and this lowers the slider functionality.
Mo ·
Ah, OK. The trigger sent to "min" is sent back wireless to the 0-1 module. Use trigger block to fix:
tester ·
Thanks, I check that too, probably this will be more proper solution.
Wrote something here? To have a post removed or your name hidden, write to [email protected].
SynthMaker