SynthMaker

Pwm is it possible to make this?

Archive · 2012 5 old posts

From the original SynthMaker forum (2004–2014), with its members’ names and dates.

djbrynte ·

I wana add pwm to my synth. Is it possible to add it. Anyoen know how to make pwm mod?

Yuroun ·

Neptune used in his little synth pwm. Look here: download/file.php?id=6787

djbrynte ·

Thnx but this seems very hard i dont understand hes synth realy.

I think i skip the PWM mod.

Neptune ·

djbrynte wrote: Thnx but this seems very hard i dont understand hes synth realy.

I think i skip the PWM mod.

Hi DJ,

My synth is as mentioned very simple.

- The osc is just the basic Saw from the Synthmaker Wiki-Page. The simple change is that the code for the saw is repated 4x. So i have 4 Saw outputs from the osc-code.

- To the OSC phase-input has been added with help from some nice guys here. (input ph1-ph4) So at this stage the osc looks like 4x the stock SAW with 4x phase input. (!!But the quality of the osc is not very good!! because of the missing bandlimit. Better use a stock SAW for synths). The inputs f1-f4 are just for the detuner.

- Behind the osc there is a phase inverter. This helps me to make out of 2 saws a square-like osc by inverting 1 phase. I have uploaded my latest beta to the examples section so you can see on the analyser display what is happening when playing with the phase. Just on the copied osc inside since i had no time yet to connect everything...

- The sub-osc is connected to the phase of the coded osc. This makes the sound more crispy and dirty. I have seen that you are using knobs from VALSIER in your synth, so you can see there or better hear what is going on.

- The extra Highpass/Lowpass filter just helps me to reduce the aliasing a little bit. It is from the reverb from the developer toolkip.

- The FakeReverb is just the AllPass Filter from the stock reverb. The filter remains because it sound nice 🙂 when fully open.

I am not sure if it is real phase width modulation or phase distortion what i am doing here.

If you have questions please dont hesitate to ask.

Regards, Neptune

djbrynte ·

Could you possible help me wit hthat because i dont understand your synth realy.

Wrote something here? To have a post removed or your name hidden, write to [email protected].

Before your first post

A few rules keep this a friendly place. You agree to them once.

Shown next to what you post, here and in the app. It doesn’t have to be your real name: 3–24 lower-case letters, digits or _ (capitals become lower case, spaces become _).

    Then your post goes up straight away.

    Delete this reply?

    Open it in SynthMaker?

    It goes on the track you’re editing there, in place of that track’s sound, and into My sounds. Your other tracks stay as they are.

    Want to keep that track’s sound? Start a new song in SynthMaker first (Song › New song), then open this.

    Report this reply?

    Only the developer reads reports. The person isn’t told who reported them.

    What’s wrong with it?

    Block this person?

    You won’t see their posts and replies here any more. They aren’t told, and you can unblock them at any time.

    People you’ve blocked

    Their posts and replies are hidden from you. Unblock someone to see them again.

    The community rules

    A few rules keep this a friendly place. Everyone agrees to them once, before their first post.