SynthMaker

Use base freq / no pitch follow

Archive · 2011 4 old posts

From the original SynthMaker forum (2004–2014), with its members’ names and dates.

Dave ·

Hi,

i would like to use always the same base freq (let's say 440 Hz) for *every* key the users presses.

So the input should be ignored and the a base freq set to default.

I did this some months ago (it's not difficult) but i lost the schemata 🙁

It was something like this:

Any ideas?

Thanks, Dave

pall ·

Hi Dave! Try this.

cyto ·

Or this...

-cyto

Xtinct ·

If you have an envelope in the signal chain you don't even need the multiplication because of the way SM's signal flow works backwards the envelope is triggered then polls the osc for its input.

Wrote something here? To have a post removed or your name hidden, write to [email protected].

Before your first post

A few rules keep this a friendly place. You agree to them once.

Shown next to what you post, here and in the app. It doesn’t have to be your real name: 3–24 lower-case letters, digits or _ (capitals become lower case, spaces become _).

    Then your post goes up straight away.

    Delete this reply?

    Open it in SynthMaker?

    It goes on the track you’re editing there, in place of that track’s sound, and into My sounds. Your other tracks stay as they are.

    Want to keep that track’s sound? Start a new song in SynthMaker first (Song › New song), then open this.

    Report this reply?

    Only the developer reads reports. The person isn’t told who reported them.

    What’s wrong with it?

    Block this person?

    You won’t see their posts and replies here any more. They aren’t told, and you can unblock them at any time.

    People you’ve blocked

    Their posts and replies are hidden from you. Unblock someone to see them again.

    The community rules

    A few rules keep this a friendly place. Everyone agrees to them once, before their first post.