SynthMaker

Help with 4byMixer pad graphics

Archive · 2011 3 old posts

From the original SynthMaker forum (2004–2014), with its members’ names and dates.

acg2010 ·

Can someone help me understand why the 4bymixer pad (by oddson) does not show up on the front panel of this osm? I have tried adding MGUI at several points, tried placing the mixing in several locations in the schematic, and tried several configurations. A pic and the osm are attached for reference. It is one layer into the schematic.

Warning: Be careful turning on the switch below the first oscillator, it activates the freeverb module and under the right conditions, I am getting run away CPU usage (100%) on my system. I need to sort this out later.

I have the mono readouts connected only to make sure the mixer pad was working properly. Also I am using SynthMaker CM so I am limited to what I can do (no coding, no newer version modules, etc).

Thanks,

Ph D(J) acg2010

cyto ·

You need to attach a wireless input to the MGUI inside the module. Like so...

-cyto

acg2010 ·

Thanks cyto, I figured it was probably something simple. 🙂

Wrote something here? To have a post removed or your name hidden, write to [email protected].

Before your first post

A few rules keep this a friendly place. You agree to them once.

Shown next to what you post, here and in the app. It doesn’t have to be your real name: 3–24 lower-case letters, digits or _ (capitals become lower case, spaces become _).

    Then your post goes up straight away.

    Delete this reply?

    Open it in SynthMaker?

    It goes on the track you’re editing there, in place of that track’s sound, and into My sounds. Your other tracks stay as they are.

    Want to keep that track’s sound? Start a new song in SynthMaker first (Song › New song), then open this.

    Report this reply?

    Only the developer reads reports. The person isn’t told who reported them.

    What’s wrong with it?

    Block this person?

    You won’t see their posts and replies here any more. They aren’t told, and you can unblock them at any time.

    People you’ve blocked

    Their posts and replies are hidden from you. Unblock someone to see them again.

    The community rules

    A few rules keep this a friendly place. Everyone agrees to them once, before their first post.