SynthMakerCyforce ·
Is it possible to "transform" or "translated" different minimum and maxuimum values inside a knob like 0...1 or 0.2...0.7 to an additional float readout with the range of 0 - 127(stepped to 0,1,2...125,126,127)?
Different Knob Values translating to 0-127
From the original SynthMaker forum (2004–2014), with its members’ names and dates.
infuzion ·
Use that little (P) in the lower-right hand corner.
Cyforce ·
Well i think i didn`t explain it clear enough what i meaned. For example, i set the minimum zu 0.4 and maximum to 0.94, as value internal of the knob(little p......) So there float readyout is between 0.4 and 0.95, logical.... but i need a way to have there a additional float readout, but in a tpyical midi cluster with stepped value in a range of 0 - 127 😉
infuzion ·
"Maths" folder has what you need, but you will have to use some Int math to get the whole-number stepping/rounding.
trogluddite ·
If you look inside the standard knobs, you can see that the min/max section is right at the end. The value coming out of the 'Preset' module is always zero to one - so a simple float multply from there will easily get you the MIDI range. SM will automatically round off floats if you put them straight into any integer connector.
PS The 0-1 range for the preset part is important if you are ever making your own knobs - that is the only range that the VST host will understand for automation.
infuzion ·
trogluddite wrote: PS The 0-1 range for the preset part is important if you are ever making your own knobs - that is the only range that the VST host will understand for automation.
Exactly! So if you need 2 ranges, you need to translate first to [0..1] then to what ever you need after the Presets module. If you want a different display that is not [0..1], & an extra output that is also different, then you need 3-4 translations.
Xtinct ·
This works for me and the preset manager seems happy with it.
infuzion ·
Xtinct wrote: This works for me and the preset manager seems happy with it.
Yes exactly, see I wanted for you to learn for yourself! & you did it! Caution: Those Min/Max modules have Wireless Outs, & I'm guessing you did not change their names from SM's defaults. SM may get confused or sum those values. You only need one.
Xtinct ·
infuzion wrote: Xtinct wrote: This works for me and the preset manager seems happy with it.
Yes exactly, see I wanted for you to learn for yourself! & you did it!.
😕 I didn't ask the question
infuzion wrote: Caution: Those Min/Max modules have Wireless Outs, & I'm guessing you did not change their names from SM's defaults. SM may get confused or sum those values. You only need one.
Good to know, these run out to a selector so they are never both outputting at the same time guess thats why I've had no problems.
Cyforce ·
Thanks for the replies, well all what i searched, was already there in the basic readout knob, so absolutly my fault 😀
Wrote something here? To have a post removed or your name hidden, write to [email protected].