SM2.0: just crashes alot

infuzion · 4 Jan 2011

Common pre-crash events: - Turning the DS Sound on or off - copy-pasting - closing out an OSM, usually when closing out SM

One bad crash corrupted a save :/

Reports & OSMs sent.

MichaelBenjamin · 4 Jan 2011

i had some situation where editing code connected to an analyser first worked, (i could make changes, let recompile, change), then after a reload of that schematic it instantly crashed on recompile of that codebox. i could not do anything but delete that box and write again. even clicking in the codebox and not changing anything then recompile that same code made sm disappear. there was stage 0 and 1 involved. and it was box dropped code from 1.1.7. so far for me sm2.0 saves working osms that it cant properly re-load. also i had encountered the randomly-skip-midi note in some other osm that mvdlee reported first. (hadnt used midi poly for a while). untill that is fixed, i think i will load up 1.1.7 again (with messed up folders).

infuzion · 13 Jan 2011

infuzion wrote: ...Often it is with the DS Out turning off & on, but also copy/pasting, switching to another pre-loaded OSM... about once every 30 minutes, very random, with different OSMs, & always skipping SM's bug reporter, & often skipping WinXP's.

Malc confirmed that turning off & on the DS Out does very randomly, as far back to atleast 1.1.7 Hard to isolate, since it is very random.

infuzion · 17 Jan 2011

I tried to drag & drop an OSM into SM & it crashed. At least I got an SM crash report this time, which was emailed. edit: another crash-often: MyCo's version A geek toy: Stream inspector

mshilarious · 15 Jul 2011

I had a crash tonight to a BSOD during a file/save operation that corrupted the file. Lost the night's work, unless there is some utility to recover corrupted files 🙁 I will post the OSM if so . . .

I only seem to have trouble when the DS input is engaged, output toggling does not cause crashes for me if the input module is not connected. I am on 2.0.4, which seems to be about the same as the 1.1.7 as I can recall.

infuzion · 15 Jul 2011

mshilarious wrote: I had a crash tonight to a BSOD during a file/save operation that corrupted the file. Lost the night's work, unless there is some utility to recover corrupted files 🙁 I will post the OSM if so . . .

Yes, you have to look in your app data folder, for me it is in: D:\Documents and Settings\t\Application Data\SynthMaker

Everyone should always save your work under a new filename every 20min at the least. I use PROJECT##workDone.osm

tor · 22 Jul 2011

Lately SM 2.05 often crash when i try to disconnect mono or packed streams. I also experienced that working in a unsynced module totally different from other synced modules affect the synced ones?????

I have sendt the crash reports to support.

Also I have a strange issue where a nonrecursive algorithm (tanHish) when placed at the output of my EQ creates ripples near nyquist. The EQ has a flat frequency response and so does the algorithm. But in series inside a plug I get the ripple. I really dont know if this is a issue with synthmaker or VST plugin analyzer.

Here is the VST with the ripples if you would like to have a look at it: http://dl.dropbox.com/u/5591159/DoublePrecisionEqualizer%20v2.dll

Any ideas?

tor · 22 Jul 2011

Here you have the EQ without the saturation: http://dl.dropbox.com/u/5591159/DoublePrecisionEqualizer%20v2%20no%20sat.dll And here the saturation with a level knob on the input: http://dl.dropbox.com/u/5591159/Saturation.dll It just does not make sence to me...